3W+10 SMD LED; With handle and hook, it's convenient. Push switch is avai-lable. With 6V input port, charger or solar power can be used for charging. Connect the plug to power socket to recharge and the charging indicator will be on.
Technical Parameters:
Model No.: DP-7088
Battery Capacity: 1200mAh
Voltage: AC 100-240V 50/60Hz
Current: AC 0.08A 0.5W
Using Time: 2.5/8 Hours
Charging Time: 15 Hours
Power: 3W+1W
Made In China
Instructions:
Put the plug into the AC 100-240V~ power socket. When the indicator is on, the battery is recharging and it needs about 15 hours to recharge.
Push switch is available. Push ahead and back to turn on the bulb and emergency light respectively.
On a full charge, it can last for about 2.5 hours and 8 hours while it's on bulb position and emergency light position respectively.
If it is recharged through sun power, the output working voltage is 5-7V, output working current is 600mA.
If it is recharged through charger, the output working voltage is 6V, output working current is 600mA.
When the light becomes weak during using, that means the battery is in lack of power. At this moment, stop using it and recharge it in time so as to protect the battery. Recharge it before the light is completely invisible, otherwise it will case damage to the battery.
Frequent use is required, long-time none use is unadvisable. if you don’t use it very often, please recharge it every 3 months, or the battery’s life-span will be shortened.
Security hotline:
400-823-3363
