Technical Parameters:

•Model No.: DP-7144

•Battery Capacity: 2400mAh

•Voltage: 

   AC 100—240V      50/60Hz

•Current: AC 0.2A  1.8W

•Power: 7.2W

•Power Factor: 0.1

•Charge Time: 10 Hours

•Using Time: 4/1.5 Hours 

   (1xLED tube/2xLED tube)

•Made In China

Instructions:

•Connect the power supply, if charging indicator turns on, then it’s in charging status. Charging time needs about 10 hours.

•Twist the rotary switch, clockwise/counterclockwise rotate brightness adjustment of LED light. Open the switch button could control single tube and double tube of emergency light. Up-shift for the single tube, down for double tube.

•If it is recharged through sun power, the output working voltage is 5-7V, output working current is 0.6A.

•If it is recharged through charger, the output working voltage is 6V, output working current is 0.6A.

•When the light becomes weak during using, that means the battery is in lack of power. At this moment, stop using it and recharge it in time so as to protect the battery. Recharge it before the light is completely invisible, otherwise it would damage the battery.

•Frequent use is required, long-time nonuse is unadvisable. If you don’t use it very often, please recharge it every 3 months, or the battery’s life-span will be shortened.

Cautions:

•Do not point the light to eyes directly, or it will affect eyesight. Children must be supervised by adults before using it.

•Keep it away from rain and dampness.

•Keep it away from the explosives and inflammables while it is charging.

•Please cut off power supply immediately if any exception happened. 

•Do not repair this product for non-professionals.

•Please install and use it properly according to manual. Do not arbitrarily modify lamps and replace parts.

•The light source is irreplaceable. Please replace the entire fixture if light source to its end.

•Between the transformer live parts and the cable, the insulation is reinforced for this lamp.

•If the power cord is damaged, Must be replaced with a dedicated cord or a dedicated component from its manufacturer or maintenance department.