Technical Parameters:

•Model No.: DP-7153

•Battery Capacity: 1300mAh

•Voltage: AC 100—240V     50/60Hz

•Current: AC 0.1A  1W

•Power: 4W

•Power Factor: 0.1

•Charge Time: 11 Hours

•Using Time: 1.5 Hours 

•Made In China

Instructions:

•Before using this product, please read the instructions. Please keep it for future reference after reading.

•Connect the power supply, if charging indicator turns on, then it’s in charging status. Charging time needs about 11 hours.

•Twist the rotary switch, clockwise/counterclockwise rotate brightness adjustment of LED light.

•When the light becomes weak during using, that means the battery is in lack of power. At this moment, stop using it and recharge it in time so as to protect the battery. Recharge it before the light is completely invisible, otherwise it would damage the battery.

•Frequent use is required, long-time nonuse is unadvisable. If you don’t use it very often, please recharge it every 3 months, or the battery’s life-span will be shortened.

Cautions:

•Please don't shot the LED light directly into eyes, it will harm eyesight. (Children should be guided by adults)

•Keep it away from rain and dampness.

•Keep the light away from flammable and explosive. The charging time can not be more than 24 hours. (Suggest to charge at day time)

•Please cut off power supply immediately if any exception happened. 

•Do not repair this product for non-professionals.

•Please install and use it properly according to manual. Do not arbitrarily modify lamps and replace parts.

•Please cut off the power when maintain product to prevent electric shock.

•The light source is irreplaceable. Please replace the entire fixture if light source to its end.

•Between the transformer live parts and the cable, the insulation is reinforced for this lamp.

•If the power cord is damaged, Must be replaced with a dedicated cord or a dedicated component from its manufacturer or maintenance department.